JR Voyager E Assembly Instructions Manual page 5

3. BUILDING SUPPLIES (NOT INCLUDED):
The following items are needed to complete the assembly of the JR Voyager:
Nylon Wire Ties to
secure radio wires
4. TOOLS NEEDED TO ASSEMBLE THE JR VOYAGER E (NOT INCLUDED):
Phillips Screwdrivers
(Large and Small)
Drill and Drill Bits
5. OPTIONAL TOOLS AND TRAINING ACCESSORIES:
Voyager E Training Gear
(JRP960625)
Ball Link Drivers
(JRP960085)
Heavy-Duty Servo Arms (3 pcs)
w/Screws
(JRPA215 or equivalent)
Nut Drivers: 4, 4.5, 5 mm
Small Hammer
Ball Link Sizing Tool
Double-Sided Servo
Mounting Tape
Needle-Nose Pliers
X-Acto Knife
(JRP960218)
Pitch Gauge
(JRP960326)
5
Whip Antenna (optional)
Scissors
Metric Ruler
(Over 20 cm)
Ball Link Pliers
(JRP960242)