JR Voyager E Assembly Instructions Manual page 27

CCPM SOFTWARE ACTIVATION AND INITIAL ADJUSTMENT (CONTINUED)
E) Travel Adjust
Press the Mode key until "TRV ADJ" (travel Adjust) appears on the screen and adjust the travel values as shown by pressing the channel key to
select the desired channel, and then the + or - key to set the desired travel value. Please note that the control stick must be moved to adjust the
desired left/right, up/down positions. Press the Mode and Channel keys simultaneously or turn the power switch off to exit the function mode.
thro
Ch
prv adj
-110
thro
Ch
trv adj
-130
Note: The travel values shown for the rudder function are for use with Piezo gyros, like the JR NEJ-400, or NEJ-450 type gyros. If a conventional
mechanical type gyro is used (JR 120, 130, etc.), then the travel values of the rudder will need to be changed to approximately 100%.
Standard Servos
THR
100
AIL
100
ELE 100
RUD
100
GER
100
PIT
ail
Ch
-100
Digital/Super Servos
THR
100
AIL
120
ELE 120
RUD
100
GER
100
PIT
ail
Ch
-120
+ -
100
100
100
70 70
100
100
ele
Ch
-100
+ -
100
120
120
85 85
100
100
ele
Ch
-120
27
rud
Ch
-70
rud
Ch
-85
pit
-100
pit
-120