Software Installation - Emerson Rosemount 148 Quick Start Manual

April 2019
1

Software installation

Procedure
1. Place the Rosemount
2. Run setup.exe from Windows
3. When first using the software, configure the appropriate COM ports
by selecting Port Settings from the Communicate menu.
4. Install MACTek
configuration on the Rosemount 148 system.
Note
The software defaults to the first available COM port.
Quick Start Guide
™
148 PC Programmer CD_ROM into the drive.
™
XP, 7, 8, or 10.
®
Modem drivers completely before beginning bench
Quick Start Guide
5