This section describes how to use the iotega's integrated keypad.
3.1 Using the Integrated Keypad
The iotega includes a built-in, touch sensitive keypad that activates by proximity. From the keypad, users can arm and dis-
arm the system, view system troubles, and activate the Fire (F), Auxiliary (A) and Panic (P) keys.
The integrated keypad can be configured to work on any partition.
Figure 3-1 Keypad - Normal Operating Mode
3.1.1 Key Functions
The following keys are enabled during normal operating mode:
Key Description
(0-
numeric entry (access code)
9)
#
clear entries, return to previous screen
*
[*] 2 for Troubles, see "Viewing Troubles from the Integrated Keypad" on page 35.
[*] 8 to enable WiFi access point (to add IP devices, i.e.,touchscreen keypad). See "WPS Mode ([*]8)" for more inform-
ation.
[*] 7 to initiate a phone test with ADC.
↑
Shift mode switches between numeric and Emergency keys
3.1.2 Emergency Keys
The Fire, Auxiliary and Panic keys can be enabled independently by the installer. All three are enabled by default. The
Emergency keys behave as follows:
Key
Alarm Type
Fire
Auxiliary
Section 3: Operation
Section 3: Operation
Indication
Keypad beeps 3 times. Siren sounds. Signal sent to monitoring station
Keypad beeps 3 times when activated and 10 times when the event is suc-
cessfully received by the central monitoring station.
Figure 3-2 Keypad - Shift Mode
- 10 -
Reporting Code
Fire Alarm (if pro-
grammed)
Auxiliary alarm