Table of Contents
Advertisement
2.2 Controls and Indicators
The iotega provides a series of LED indicators to notify users of system status.
Figure 2-5 LED Indicators
1. Power LED
2. Ready to Arm LED
3. Armed LED
4. Trouble LED
5. WiFi Signal Strength LED
6. Cellular Signal Strength LED
7. Remote Connection LED
8. Siren
9. Microphone
Table 2-1 LED Indicator Operation
LED
Indicator
Power
ON Steady
[Green]
OFF
Flashing
Ready
ON Steady
[Green]
OFF
Flashing [Green]
Section 2: Installation
Description
AC power is connected to the system
· System is not powered On
· NO AC connected, and system is operating on backup battery
· NO AC connected and backup battery is discharged
System test in progress ( Ready, Trouble and Arm LED's flashing at same time)
Partition is ready to arm
Partition is not ready to arm. Not all zones are secure or an alarm is present.
Installer Walk Test ( Ready, Trouble and Arm LED's flashing at same time) or sys-
tem test in progress ( Ready, Trouble and Arm LED's flashing at same time)
- 6 -
Advertisement
Table of Contents
