Table of Contents
Advertisement
LED
Indicator
Armed
ON Steady
[Red]
Flashing
[Red]
Flashing
[Red]
OFF
Trouble
ON Steady
[Amber]
Single flash
[Amber]
Two flashes
[Amber]
Three Flashes
[Amber]
Flashing
[Amber]
OFF
Wi-Fi Signal
ON Steady [Green] Strong Signal Connection
ON Flashing
Strength
[Green]
ON Steady
[Amber]
ON Flashing
[Amber]
On Steady [Red]
Flashing
[Amber]
OFF
Cellular Sig-
ON Steady [Green] Strong signal connection
nal Strength
ON Steady
[Amber]
ON Steady
[Red]
Flashing
[Amber]
OFF
Section 2: Installation
Description
Partition is armed
System in Alarm. [Note: this LED does not flash for silent alarms or panic alarms]
Installer Walk Test ( Ready, Trouble and Arm LED's flashing at same time) or sys-
tem test in progress ( Ready, Trouble and Arm LED's flashing at same time)
Partition is disarmed or audible alarm annunciation is deactivated
System trouble is present
[*][2] System Trouble menu level 1
[*][2] System Trouble menu 2
[*][2] System Trouble menu 3
Access code is required to view Trouble menu, Installer Walk Test ( Ready,
Trouble and Arm LED's flashing at same time) or a system test is in progress (
Ready, Trouble and Arm LED's flashing at same time)
No system troubles
Wi-Fi active in WSA mode (for AP mode)
Radio active with weak signal connection
Z-Wave is active in learn pair mode
No Signal
System Test ( AC, Ready, Trouble, Arm LED's, WiFi Trouble, Cellular Trouble &
System Remote Status flashing at same time)
WiFi disabled
Weak signal connection
No Signal or no connection
System Test ( AC, Ready, Trouble, Arm LED's, WiFi Trouble, Cellular Trouble &
System remote status flashing at same time)
Cellular is disabled
- 7 -
Advertisement
Table of Contents
