Table of Contents
Advertisement
5790B
Operators Manual
DELTA?
Returns the delta (transfer) value from the Product. This is the difference
between the reference value in memory and the present input. (Also see the
DUNIT command.)
Parameters
Responses:
DFILT
Sets the digital filter parameters. The default is OFF.
Parameter
DFILT?
Returns the digital filter parameter settings.
Parameter
Response
DHCP
Sequential command. Enables/disables DHCP (Dynamic Host Configuration
Protocol) for LAN operation.
Parameter
DHCP?
Sequential command. Returns the current state of the DHCP enable setting.
Parameter
Response
Example
Returns ON if DHCP is enabled.
6-42
None
1. (Float) the transfer value. The value is 0 if no reference has been set.
2. (String) PPM, PCT, V, RATIO as set by the DUNIT command.
1. OFF, SLOW, MEDIUM, or FAST (the setting for mode)
2. (Optional) FINE, COARSE, or MEDIUM (the setting for restart threshold)
None
1. (CRD) OFF, SLOW, MEDIUM, or FAST (the setting for mode)
2. (CRD) FINE, COARSE, or MEDIUM (the setting for restart threshold)
ON (enables DHCP operation)
OFF (disables DHCP operation)
None
(CRD)
DHCP?
Advertisement
Table of Contents
