Seat Arona 2018 Owner's Manual page 291

– deactivates the Automatic acti-
off

›››
option page 287.
vation
Front volume*
Volume in the front and rear area.
Front sound settings/sharpness*
Frequency (tone) of the sound in the front
area.
Rear volume*
Volume in the rear area.
Rear sound settings/sharpness*
Frequency (tone) of the sound in the rear
area.
Adjust volume
With the parking aid switched on, the active
audio/video source volume will be reduced to
the intensity of the selected setting.
Error messages
When the Parking Aid is activated or when it is
switched on, if a message reporting a Parking
aid error is displayed on the instrument panel,
there is a fault in the system.
If the fault does not disappear before discon-
necting the ignition, the next time that the
Driver assistance systems
parking aid is engaged in reverse, no audible
signal of the existence of a fault will be is-
sued.
If there is a fault in the parking aid system a
message will appear on the instrument panel
indicating the error.
If there is a fault in a sensor, the symbol
displayed on the Easy Connect display in
front of/behind the vehicle. If a rear sensor is
faulty, only the obstacles in area
›››
played Fig. 254. If a front sensor is faulty,
only the obstacles in area are displayed.
B
Have the fault corrected by a specialised
workshop without delay.
Driving with a trailer
Parking assist display on the screen
Fig. 258
with trailer attached.
In vehicles equipped with a towing bracket
device from the factory, when the trailer is
connected electrically, the Parking Aid rear
sensors will not be activated when reverse
gear is engaged, when the selector lever is
turned to position R or when the button
pressed.
is

The distance to possible obstacles at the rear
of the vehicle and at its sides will not be dis-
played on the screen and will not be indica-
are dis-
A
ted by means of audible sound signals.
The Easy Connect system screen will only
display objects detected at the front, and the
vehicle's trajectory will be hidden.
Braking while manoeuvring func-
tion*
3 Only valid with Parking System Plus
The emergency braking function is used to
minimise damage in the event of a collision.
Depending on the equipment, if the Parking
Aid is active, the braking while manoeuvring
function activates emergency braking when it
detects an obstacle in the vehicle's path that
could cause a collision, driving forwards or in
reverse.
The function will not brake if the Parking Aid is
activated automatically. For the system to
operate, manoeuvring speed must be be-
tween 2.5 and 10 km/h (between 1.5 and 6
is

»
289