Step 1.
Turn the key in the direction of arrow
●
til the part of the key with the holes reaches
›››
the top position
Fig. 264
(arrow).
Step 2.
Grip the detachable ball below the protec-
●
tive cover.
Press the release bolt
in the direction of
●
B
arrow
, and at the same time press lever
2
in the direction of arrow
as far as it will go
3
›››
Fig.
265.
The lever will remain blocked in this position.
Towing bracket device
Standby position
un-
1
C
Reserve position: position of the lever
Fig. 266
and the release bolt.
Standby position adjusted properly
›››
Key
Fig. 266
●
A
tion (the part of the key with the holes is fac-
ing upwards).
›››
Lever
Fig. 266
●
B
tion.
The release bolt
●
C
moved.
Thus adjusted, the detachable ball is ready
for installation.
The key cannot be removed or turned in the
standby position.
Assembling the detachable ball -
Step 1
Fig. 267
bolt in the deployed position.
Fitting the detachable ball
is in the released posi-
Remove the hook housing cap
●
›››
is in the bottom posi-
Set the detachable ball to its standby posi-
●
tion
›››
Fig. 266
can be
Grip the detachable ball from below
●
›››
CAUTION
Fitting the detachable ball / Release
4
Fig. 263
downwards.
›››
page
296.
Fig. 267
and insert it into the hook housing
»
297