Adjust the vents so that the air flow is direc-
●
ted slightly upwards.
Change between degrees Centigrade and
degrees Fahrenheit
The units of degrees can be changed via the
Easy Connect system using the
ton and the function button SETTINGS >
.
Units > Temperature
Automatic mode
Automatic mode is used to maintain a con-
stant temperature and demist the windows
inside the vehicle.
Set a interior temperature between +16°C
●
(+64°F) and +29°C (+84°F).
Adjust the vents so that the air flow is direc-
●
ted slightly upwards.
Press the
button, AUTO is displayed on
●
the screen.
Automatic mode is switched off by pressing
the air distribution buttons or increasing or
decreasing the blower speed. However, the
temperature remains regulated.
Adjusting the temperature
When you switch on the ignition, control
●
›››
Fig. 171
can be used to set the required in-
terior temperature.
Air conditioning
It is possible to select interior temperatures
from +16°C (+64°F) to +29°C (+84°F). In this
range the temperature is regulated automati-
cally. If a temperature below +16°C (+64°F) is
selected, "LO" is displayed on the screen. If a
temperature above +29°C (+84°F) is selec-
ted, "HI" is displayed on the screen. At both
/
but-
extremes, Climatronic works at maximum
cooling or heating power, respectively. The
temperature is not regulated.
In the event of prolonged, irregular distribu-
tion of the air flow from the outlets (particu-
larly the footwells) and significant differences
in temperature, e.g. on leaving the vehicle,
sensitive people may catch cold.
Fan regulation
Climatronic automatically regulates blower
speed according to the interior temperature.
It is possible, however, to set the blower
speed to suit requirements.
Press the
●
2
fan speed.
Climatronic will switch off when the blower
switches off.
Turn on windscreen defrost
1
Press the button
●
buttons to increase or reduce
›››
Fig.
171.
Switching off windscreen defrosting
Press the
button several times or
●
press the
button.
The temperature is regulated automatically.
›››
The air output from the vents
increased.
WARNING
Read and observe the safety warnings
in General notes on page
161.
Note
A visit to the specialised service once a
●
year is recommended to clean the Clima-
tronic system.
The interior temperature sensor is at the
●
bottom. Do not cover it with stickers or the
like, as this could have a negative effect on
Climatronic operations.
Fig. 168
is
2
›››
169