Seat Arona 2018 Owner's Manual page 199

Connecting an external audio
source through WLAN*
3 Not available for model: Media System
Touch/Colour
WLAN allows wireless connection between an
external audio source (for example a smart
phone) and the Infotainment system.
To use this connection, the device being con-
nected must have an app compatible with
the UPnP (Universal Plug and Play) communi-
cation protocol, allowing the app to provide
the system with the available media content.
Conditions
Having a compatible (UPnP) app installed
●
on the mobile device.
Having the Enable WLAN connection op-
●
tion active, which can be found in the wireless
connection configuration.
Pairing the mobile device to the Infotain-
●
ment system using a password generated by
the system. The pairing must be done from
the mobile device that you wish to connect to
the Infotainment system.
Starting the WLAN audio transfer
Lower the base volume on the Infotainment
●
system.
Start the UPnP app or the app for the play-
●
back of the WLAN audio source.
Operating modes
In the MEDIA main menu, press the
●
function button and select
WLAN
Please refer to the instructions on the
●
screen of the Infotainment system and on the
WLAN audio source regarding the rest of the
procedure.
Controlling playback
The extent to which the WLAN audio source
can be controlled via the Infotainment system
depends on the connected WLAN audio
source and the application used.
Note
The Infotainment system does not pro-
●
vide an internet connection, it only estab-
lishes a wireless connection between the
mobile device and said system.
Via the WLAN, only the connection be-
●
tween the device and the Infotainment sys-
tem can be guaranteed, its operation de-
pends on the application itself.
Images
3 Valid for the model: Media System Plus/Navi
System
Using the Images menu, image files can be
viewed (e.g. photos) individually or as a slide-
show.
The image files must be stored on a compati-
SOURCE
. ble data storage device (e.g., a CD or an SD
card).
Press the Infotainment button
●
›››
Fig. 173 and then press the
12
function button.
Press the
● SOURCE
the source where the pictures in question are
located.
Function button: function
Viewing and selecting the source.
SOURCE
Opens a list of image files.
SELECTION
The image viewed was obtained via
GPS localisation and upon pressing

this function button, the navigator
menu opens to start a route to this
destination.
Rotate the view of the image to the
/
 
left or the right.

Reset the view of the image.
To stop the playback of a slideshow.

The
To continue the playback of a slide-

show. The
changes to

Images
function button to select
function button changes to

.

function button

.

»
197