Seat Arona 2018 Owner's Manual page 140

Convenience opening and closing
Use the convenience opening/closing func-
tion to easily open/close all the windows
from the outside.
Convenience open function
Press and hold the button on the remote
– 
control key until all the windows have
reached the desired position, or
First unlock the vehicle using the
–
on the remote control key and then keep
the key in the driver door lock until all the
windows have reached the required posi-
tion.
Convenience close function
Press and hold the button on the remote
– 
control key until all the windows are closed
›››
, or
Lock the driver's door with the key and hold
–
the key in the lock position until all the win-
dows are closed
Programming convenience opening in the
Easy Connect*
Select: /
SETTINGS> Opening and
– 

closing > Electric windows > Con-
, to choose between all
venience opening
the windows ( All ), only the driver's window
( Driver ) or none ( Deactivated ).
138
WARNING
Never close the windows without due
●
care or proper control. There is a risk of suf-
fering injury.
For safety reasons, you should only use
●
the remote control open and close func-
tions within about 2 metres of the vehicle.
To avoid injuries, always keep an eye on the
windows when pressing the button to close
them. The windows stop moving as soon as
the button is released.
button

One-touch opening and closing*
One-touch opening and closing means you
do not have to hold down the button.
›››
Buttons Fig. 141
positions for opening windows and two for
closing them. This makes it easier to open
and close windows to the desired position.
One-touch closing
Pull up the window button briefly up to the
–
second position. The window closes fully.
One-touch opening
Push down the window button briefly up to
–
the second position. The window opens
fully.
Operation
, , and have two
1 2 3 4
Resetting one-touch opening and closing
The automatic open and close function will
–
not work if the battery has been temporarily
disconnected. The function can be restored
as follows:
Close the window as far as it will go by lift-
–
ing and holding the electric window switch.
Release the switch and then lift it again for 1
–
second. This will re-enable the automatic
function.
If you push (or pull) a button to the first stage,
the window will open (or close) until you re-
lease the button. If you push or lift the button
briefly to the second stage, the window will
open (one-touch opening) or close (one-
touch closing) automatically. If you operate
the button while the window is opening or
closing, it stops at this position.