Motorola MVME2300SC Series Installation And Use Manual page 20

Hardware Preparation and Installation
1
What you need to do ...
Install the primary
PMCspan module (if
used).
Install the secondary
PMCspan module (if
used).
Install and connect the
MVME2300SC module.
Connect a console
terminal, if necessary.
Connect any other
optional devices or
equipment you will be
using.
Power up the system.
Note that the debugger
firmware initializes the
MVME2300SC.
Initialize the system
clock.
1-2
Table 1-1. Startup Overview (Continued)
Refer to ...
Installing the Hardware, Primary PMCspan Module
For additional information on PMCspan modules, refer
to the PMCspan PMC Adapter Carrier Module
Installation and Use manual, listed in Appendix C,
Related Documentation.
Installing the Hardware, Secondary PMCspan Module
For additional information on PMCspan modules, refer
to the PMCspan PMC Adapter Carrier Module
Installation and Use manual, listed in Appendix C,
Related Documentation.
Installing the Hardware, MVME2300SC
Installing the Hardware, System Console Terminal
Installation Considerations
Connector Pin Assignments
For more information on optional devices and
equipment, refer to the documentation provided with
that equipment.
Startup and Operation
Troubleshooting
PPCBug Firmware, Using PPCBug
You may also wish to obtain the PPCBug Diagnostics
Manual, listed in Appendix C, Related
Documentation.
PPCBug Firmware, Debugger Commands
Computer Group Literature Center Web Site
On
page ...
1-13
1-16
1-18
1-20
1-21
5-1
2-1
B-1
3-3
3-4