Precipitation Data Viewing Range - Garmin G500 Pilot's Manual

Cover TOC
4.9.6

Precipitation Data Viewing Range

The Precipitation (PRECIP) Viewing Range option allows you to select the
map range where at and below the selected value PRECIP weather products will
be shown on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off
is selected, PRECIP weather data will not be shown. In the figure below where
500 NM is selected, PRECIP data will be shown at map ranges of 500 NM and
lower. TFRs and METARs are the only weather products shown below 10 NM.
Figure 4-106 GFDS PRECIP Weather Map Display and Legend
1. While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options . The Weather Setup option will
be highlighted. Press ENT
2. Turn the large MFD knob to highlight PRECIP Data Viewing Range. Turn the
small MFD knob to highlight the desired value.
3. Press ENT to accept the displayed value. The next option will be highlighted.
4. Press the small MFD knob to cancel selection or to end editing and return to
the WX page or turn the large MFD knob to the next option.
4-124
.
Garmin G500/G600 Pilot's Guide
Coverage Boundary
190-00601-02 Rev. J