Wind Vectors; Dme Indication - Garmin G500 Pilot's Manual

Cover TOC
2.8.3

Wind Vectors

When selected, wind vector information is displayed in a window on the
PFD to the left of the HSI. The Wind Vector style is configured in the Aux Mode
System Setup page. While on the ground, the Wind Vector window will indicate
"No Wind Data."
Four styles are available as shown below.
Style 1
2.8.4

DME Indication

When selected, DME information is displayed in a window in the lower left
corner of the PFD. The distance to the station and the Nav source used are
shown.
DME Information
NOTE: The capability of providing DME information requires installation
of the GAD 43e.
2-30
Figure 2-39 Outside Air Temperature Selection
Figure 2-40 Wind Vector with No Wind Data
Style 2
Figure 2-41 Wind Vector Style
DME Hold Annunciation
Selected DME Set Hold for Selected DME
Figure 2-42 DME Indication
Garmin G500/G600 Pilot's Guide
Style 3 Style 4
190-00601-02 Rev. J