Garmin G500 Pilot's Manual page 230

Cover TOC
1. While viewing Weather Setup 1/2 menu, turn the large MFD knob to highlight
the METAR Data Viewing Range value.
2. Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
3. Press the small MFD knob to cancel selection or to end editing and return to
the previously viewed page or turn the large MFD knob to the next option.
Viewing Textual METARs
Textual METARs can be viewed by selecting an airport on the Map or Weather
(WX) pages.
1. While viewing a Map or Weather page, Use the small and large MFD knobs to
move the cursor to highlight an airport with a METAR flag. Press ENT.
2. The Waypoint Information page for that airport will now be shown. Press the
WX soft key to view weather information for the waypoint.
3. Use the small MFD knob or the large MFD knob to scroll through the available
information.
4. Press the small MFD knob to return to the previously viewed page.
4-74
Figure 4-50 XM Weather - Textual METARs
Garmin G500/G600 Pilot's Guide 190-00601-02 Rev. J