Cover
TOC
4.5.2
Terrain-SVT Page Aviation Data
Select the display of Aviation data on the Terrain-SVT page. The Page Menu
selections allow you to hide or show aviation data overlay on the Terrain or the
Map Setup options for the Navigation Map pages.
1. While viewing the Terrain page of the MAP page group, press MENU for Map
selections to hide or show aviation data overlay on the Terrain or the Map
Setup options for the Navigation Map pages.
Figure 4-25 Show/Hide Aviation Data on the Terrain-SVT Page
2. Press ENT to save the highlighted value.
4.5.3
Inhibiting/Enabling Terrain-SVT Alerting
Terrain-SVT has an inhibit mode that deactivates the FLTA aural and visual
alerts. Pilots should use discretion when inhibiting Terrain-SVT and always
remember to enable the system when appropriate.
Figure 4-26 Terrain-SVT Alerting Disabled (Alerts Inhibited) Annunciation (PFD & MFD)
1. In MAP page group, turn the small MFD knob to reach the Terrain SVT Page.
2. Press the INHIBIT soft key to inhibit or enable Terrain SVT (choice dependent
on current state).
OR
1. Press the MENU key.
2. Use the large or small MFD knob to highlight "Inhibit Terrain" or "Enable
Terrain" (choice dependent on current state) and press the ENT key.
4-28
Garmin G500/G600 Pilot's Guide
190-00601-02 Rev. J