Garmin G500 Pilot's Manual page 93

3. Press ENT to accept the displayed value. The next option will be highlighted.
4. Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
Map Orientation
The Orientation option sets the orientation of the Navigation Map.
North Up At
The North Up At option allows you to select the map range where at and
above the selected value the Map Orientation will automatically change to North
Up. For example, with the 500 NM value selected and the map range of the MFD
is 500 NM or more, the map orientation will automatically become North Up.
Auto Zoom
With a valid flight plan, the Auto Zoom feature will automatically change the
Navigation Map range depending on the distance to the next waypoint in the
flight plan. If enabled, it will also automatically zoom to the SafeTaxi zoom range
when the aircraft is on the ground. Auto Zoom can be overridden at any time
by manually zooming with the RNG keys or enabling OBS mode. Auto Zoom is
re-enabled during any one of the following conditions:
• The active waypoint changes during flight.
• The aircraft lands.
• OBS mode is disabled.
• The Navigation Map' s Auto Zoom settings are changed.
Land Data
The Land Data option selects whether detailed land features, such as rivers,
roads, cities, are displayed. Topo features, traffic, terrain, and obstacles will still
be displayed, even with Land Data turned off.
190-00601-02 Rev. J
Figure 3-13 Navigation Map Orientation
Garmin G500/G600 Pilot's Guide
TOC Cover
3-11