Xm Freezing Level - Garmin G500 Pilot's Manual

Cover TOC
4.7.23

XM Freezing Level

Freezing Level data shows the color-coded contour lines for the altitude and
location at which the Freezing Level is found. When no data is displayed for a
given altitude, the data for that altitude has not been received, or is out of date
and has been removed from the display. New data appears at the next update.
Freezing Level Viewing Range
The Freezing Level Viewing Range option allows you to select the map range
where at and below that value Freezing Level weather products will be shown
on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected,
Freezing Level Data will not be shown. Where a value (such as 100 NM) is
selected, Freezing Level data will be shown at map ranges of the selected value
(100 NM) and lower.
1. While viewing Weather Setup 2/2 menu, turn the large MFD knob to highlight
the Frz Lvl Viewing Range value.
2. Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
3. Press the small MFD knob to cancel selection or to end editing and return to
the previously viewed page or turn the large MFD knob to the next option.
4-86
Figure 4-65 XM Weather - Freezing Levels
Garmin G500/G600 Pilot's Guide 190-00601-02 Rev. J