Garmin G500 Pilot's Manual page 302

Cover TOC
SIGMET/AIRMET Viewing Range
The SIGMET/AIRMET Viewing Range option allows you to select the
map range where at and below that value SIGMET/AIRMET products will be
shown on the selected MFD FIS-B Weather Map page (1, 2, or 3). When Off
is selected, SIGMET/AIRMET will not be shown. For a value selected (such as,
150 NM), SIGMET/AIRMET data will be shown at map ranges of that value
(150 NM), and lower.
1. While viewing a FIS-B Weather Map page of the WX page group, press the
MENU key to display the Page Menu Options . The cursor flashes on the
"Weather Setup" option. Press ENT
2. Turn the large MFD knob to highlight the SIGMET/AIRMET Viewing Range
value.
3. Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
4. Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
4-146
Figure 4-125 FIS-B - AIRMETs/SIGMETs
.
Garmin G500/G600 Pilot's Guide
Cursor Location
Turbulence Line
Cursor On AIRMET/SIGMET Line
Surface Winds Line
IFR and Mountain Obscured Line
190-00601-02 Rev. J