Xm Cell Movement; Cell Movement - Garmin G500 Pilot's Manual

Cover TOC
4.7.20

XM Cell Movement

Cell Movement data shows the location and movement of storm cells as
identified by a ground-based system. Cells are represented by yellow squares,
with direction of movement indicated with short, orange arrows.
On most applicable maps, Cell Movement data is selected for display along
with NEXRAD. On the Weather Data Link Page, Cell Movement data can be
selected independently.
Cell Movement Data Viewing Range
The Cell Movement Data Viewing Range option allows you to select the map
range and below where Cell Movement weather products will appear on the
selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected, Cell
Movement will not be shown. Where a value (such as 100 NM) is selected, Cell
Movement data will be shown at map ranges of the selected value (100 NM)
and lower.
1. While viewing Weather Setup 2/2 menu, turn the large MFD knob to highlight
the Cell Movement Data Viewing Range option.
2. Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
3. Press the small MFD knob to cancel selection or to end editing and return to
the previously viewed page or turn the large MFD knob to the next option.
4-82
Figure 4-61 XM Weather - Cell Movement
Garmin G500/G600 Pilot's Guide 190-00601-02 Rev. J