Xm County Warnings - Garmin G500 Pilot's Manual

4.7.18

XM County Warnings

County data provides specific public awareness and protection weather
warnings from the National Weather Service (NWS). This can include
information on fires, tornadoes, severe thunderstorms, flood conditions, and
other natural disasters.
County Data Viewing Range
The County Data Viewing Range option allows you to select the map range
where at and below that value County weather products will be shown on the
selected MFD Wx Data Link Map pages (1, 2, or 3). When Off is selected, County
Data will not be shown. Where a value (such as 100 NM) is selected, County
data will be shown at map ranges of the selected value (100 NM) and lower.
1. While viewing Weather Setup 1/2 menu, turn the large MFD knob to highlight
the County Data Viewing Range value.
2. Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
3. Press the small MFD knob to cancel selection or to end editing and return to
the previously viewed page or turn the large MFD knob to the next option.
190-00601-02 Rev. J
Figure 4-58 XM Weather - County Warnings
Garmin G500/G600 Pilot's Guide
TOC Cover
4-79