Garmin G500 Pilot's Manual page 154

Cover TOC
Runway Information Selection
Information is provided for each runway showing the following detail:
runway number, runway length, surface type, and the frequency for Pilot-
Controlled Lighting (PCL).
Runway Number
Runway Length
& Width
Lighting Information
1. While viewing the Waypoint Information page of the FPL page group, press the
RWY/FREQ soft key to view information about the waypoint and press the
small MFD knob to activate the cursor.
2. Use the large MFD knob to highlight the Runway and use the small MFD knob
to display the available runways.
3. Press the small MFD knob to cancel editing.
Facility Frequency Selection
The Frequency window at the bottom of the Waypoint Information page
shows the frequencies available for the selected waypoint. A scroll bar is shown
on the right side of the Frequency window if more frequencies are available.
1. While viewing the Waypoint Information page of the FPL page group, press the
RWY/FREQ soft key to view information about the waypoint and then press
the small MFD knob to activate the cursor.
2. Turn the small MFD knob to scroll through the available frequencies.
3. Press the small MFD knob to exit.
3-72
Figure 3-102 Waypoint Runway Information
Figure 3-103 Waypoint Frequency Information
Garmin G500/G600 Pilot's Guide
Arrow Indicates
More Runways
Runway Surface
190-00601-02 Rev. J