Resolving Database Conflicts - Garmin G500 Pilot's Manual

TOC Cover
3.2.4.2

Resolving Database Conflicts

If the G500/G600 determines that there are multiple LRUs with the newest
cycle of a database, but they have different regions or types of that database
(i.e., Fixed-wing vs. Rotorcraft navigation database, different regions of the
navigation database, or different obstacle database types) then a database conflict
will occur. When a database conflict occurs, that database will not be SYNC'd
until the pilot resolves the conflict. Initiate the resolve conflicts function on the
unit that contains the databases which the pilot wishes to use. These databases
will then be sent to other units.
1. Press the DB SYNC soft key, and then select the Resolve Conflicts function
on the LRU with the desired databases.
Figure 3-60 Database Conflicts
2. Select YES to continue and push the database to all other LRUs.
Figure 3-61 Confirm Database Sync
3-45
190-00601-02 Rev. J Garmin G500/G600 Pilot's Guide