Garmin G500 Pilot's Manual page 201

Hide thumbs Also See for G500:

Table of Contents

Switching Between TIS Operating Modes

1. Turn the large MFD knob to the MAP page group and then turn the small MFD

knob to the Traffic Map Page.

2. Select the STANDBY or OPERATE soft key to switch between modes. The mode

is displayed in the upper left corner of the Traffic Map Page.

1. Press the MENU key.

2. Select Operate mode or Standby mode whether airborne or on the ground.

3. Press the ENT key.

NOTE: An alert will be generated when Standby is selected and the

aircraft is in the air.

The annunciations indicate the status of traffic information appear in a banner

at the lower left corner of maps on which traffic can be displayed.

190-00601-02 Rev. J

Garmin G500/G600 Pilot's Guide