Table of Contents
Advertisement
Slow & Fast Motion Mode
Slow & Fast Motion Mode
This mode allows you to change the shooting frame rate to achieve a slow motion or fast motion effect during
playback. Sound is not recorded in this special recording mode.
96
Operating modes:
1 Touch the slow & fast motion button at the bottom right of the screen.
• Alternatively, you can use the [3 Recording Setup] > [1] > [Slow & Fast
Motion] setting.
2 Select the desired slow/fast motion rate and then touch [K] or [X].
• Select [OFF Normal Recording] to turn off slow & fast motion recording.
• The slow/fast motion rate appears in the slow & fast motion button.
3 Press the START/STOP button to begin recording.
4 Press the START/STOP button again to stop recording.
Available slow/fast motion rates
1, 2
1
x1/4
x1/2
1
Not available when recording 4K clips.
2
Clips recorded with this option will have a resolution of 1280x720 and a bit rate of 18 Mbps. Also, face detection & tracking will
not be available.
NOTES
• Slow & fast motion recording cannot be used together with pre-recording mode.
• The slow/fast motion rate cannot be changed while recording.
• Clips will have a frame rate of 25.00P.
• This function is not available when the system frequency is set to 24.00 Hz.
• Slow & fast motion recording will be deactivated if you change the video configuration.
• During slow & fast motion recording mode, the time code's running mode (A 84) can be set to [Rec Run] or
[Regen.] and the time code advances by the number of frames recorded. If the time code's running mode is
set to [Free Run], the running mode will switch to [Rec Run] during slow & fast motion recording mode. When
slow & fast motion recording mode is deactivated, the running mode will return to its previous setting.
Table of Contents
x2
x4
x10
x20
x60
x120
Menus
x1200
Index
Advertisement
Table of Contents
