Table of Contents
Advertisement
Preparing the Camcorder
3 Attach the viewfinder unit cover, hook the viewfinder unit
latch to the left side of the cover and then fasten the latch.
24
NOTES
• When you are not using the viewfinder unit, make sure to attach the viewfinder unit cover to the unit.
Attaching the MA-400 Microphone Adapter
By attaching the microphone adapter to the camcorder, you can use the INPUT terminals to record audio from
commercially available microphones or analog line in sources with an XLR connector. The microphone adapter is
powered by the camcorder's power supply.
1 Attach the supplied cable clamp to the attachment
base at the back of the microphone adapter ( ) and
tighten the lock screw ( ).
2 Insert the attachment base at the bottom of the
microphone adapter ( ) to the camcorder's accessory
shoe and tighten the lock screw ( ).
Table of Contents
Menus
Index
Advertisement
Table of Contents
