Table of Contents
Advertisement
Recording Audio
Using the MIC Terminal/Built-in Microphone while the
Microphone Adapter is Attached
To use an external microphone connected to the MIC terminal or use the
built-in microphone while the supplied microphone adapter is attached to
88
the camcorder, follow the procedure below to deactivate the INPUT
terminals.
1 Press the MENU button.
2 Open the [INPUT 1/2] submenu.
[¡ Audio Setup] > [1] > [INPUT 1/2]
3 Select [
Off] and then touch [X].
•
will appear on the bottom right of the screen.
• Select [
Using the INPUT 1/INPUT 2 Terminals
When the supplied microphone adapter is attached to the camcorder, you can use the INPUT terminals to
record audio independently to two audio channels from a microphone or analog audio input source.
To select the audio source, set the INPUT 1 or INPUT 2 switch to
LINE or MIC as necessary.
• To supply a microphone with phantom power, set the switch to
MIC+48V instead. Make sure to connect the microphone first, before
turning the phantom power on. Keep the microphone connected when
turning off the phantom power.
• When using the INPUT terminals to record to only one channel, use the
INPUT 1 terminal.
IMPORTANT
• When connecting a microphone or device that does not support
phantom power, make sure to set the corresponding INPUT switch to
MIC or LINE, respectively. If you set the switch to MIC+48V, the
microphone or device may be damaged.
Table of Contents
On] to reactivate the INPUT terminals.
INPUT 1/
INPUT 2
switches
Menus
[¡ Audio Setup]
[1]
[INPUT 1/2]
[
On]
Index
Advertisement
Table of Contents
