Table of Contents
Advertisement
Recording GPS Information (Geotagging)
Recording GPS Information (Geotagging)
When the optional GP-E2 GPS Receiver is connected to the camcorder's USB terminal, the camcorder will
automatically record the GPS information (time in the UTC standard*, longitude, latitude and altitude) to every
100
recording you make. The GPS information is recorded as part of the clip's metadata and can be used to organize
and search recordings using Canon XF Utility (A 122).
* The time in the UTC standard is recorded for photos only.
Connecting the GPS Receiver
Turn off the camcorder and the receiver. Connect the receiver to the camcorder's USB terminal using the USB
cable*. When connecting the GPS receiver, we recommend putting it in the carrying case supplied with the GPS
receiver and carrying it on your waist. For details about using the receiver, refer to the GP-E2 Instruction Manual.
* Supplied with the optional GP-E2 GPS Receiver.
USB terminal
Activating the GPS Receiver
After connecting the GPS receiver, turn on the camcorder and receiver.
• The
icon appears on the right of the screen and will flash as the receiver tries to acquire satellite signals.
• When satellite signals are correctly acquired, the
icon will stay continuously on. GPS functions will be
activated and clips and photos recorded thereafter will be geotagged.
Operating modes:
Table of Contents
Menus
Index
Advertisement
Table of Contents
