Table of Contents
Advertisement
Recording Audio
Microphone Attenuator (MIC Terminal)
You can activate the microphone attenuator (20 dB) for a microphone
connected to the MIC terminal to prevent audio from being distorted if the
audio level is too high.
92
1 Press the MENU button.
2 Open the [MIC Att.] submenu.
[¡ Audio Setup] > [2] > [MIC Att.]
3 Select the desired option and then touch [X].
Options
[i On]:
The microphone attenuator will be activated at all times to reproduce more faithfully the sound
dynamics.
[j Off]:
The microphone attenuator will be deactivated at all times.
Low-Cut Filter (MIC Terminal)
When you are recording using a microphone connected to the MIC
terminal, you can activate the low-cut filter to reduce the sound of blowing
wind, a car's engine and similar ambient sounds.
1 Press the MENU button.
2 Open the [MIC Low Cut] submenu.
[¡ Audio Setup] > [2] > [MIC Low Cut]
3 Select the desired option and then touch [X].
Microphone Attenuator (Built-in Microphone)
You can activate the microphone attenuator (20 dB) for the built-in
microphone to prevent audio from being distorted if the audio level is too
high.
1 Press the MENU button.
2 Open the [Built-in Mic Att.] submenu.
[¡ Audio Setup] > [2] > [Built-in Mic Att.]
3 Select the desired option and then touch [X].
Options
[i On]:
The built-in microphone attenuator will be activated at all times to reproduce more faithfully the
sound dynamics.
[j Off]:
The built-in microphone attenuator will be deactivated at all times.
Table of Contents
Menus
[¡ Audio Setup]
[2]
[MIC Att.]
[j Off]
[¡ Audio Setup]
[2]
[MIC Low Cut]
j
[
Off]
[¡ Audio Setup]
[2]
[Built-in Mic Att.]
[j Off]
Index
Advertisement
Table of Contents
