Table of Contents
Advertisement
Microphone Attenuator (Built-in Microphone or MIC Terminal)
If the audio level is too high and the audio sounds distorted while recording with the built-in
microphone or external microphone (MIC terminal), activate the microphone attenuator (20 dB) for the
respective microphone.
1 Select [Built-in Mic Att.] or [MIC Att.].
!
>
[C
Audio Setup]
2 Select the desired option and then select [X].
Options
[2 Automatic]:
The camcorder will automatically activate the microphone attenuator as necessary
for optimal audio recording levels so high audio levels will not be distorted.
[i On]:
The microphone attenuator will be activated at all times to reproduce more
faithfully the sound dynamics. å will appear on the screen.
[j Off]:
The microphone attenuator will be deactivated at all times.
screen.
Low-Cut Filter (Built-in Microphone or MIC Terminal)
You can activate the low cut filter to reduce the sound of blowing wind, a car's engine and similar
ambient sounds. When recording in surroundings unaffected by wind or if you want to record low-
frequency sounds, we recommend turning off the low-cut filter.
1 Select [Built-in Mic Low Cut] or [MIC Low Cut].
>
[C ! Audio Setup]
2 Select [i On] and then select [X].
>
[Built-in Mic Att.] or [MIC Att.]
>
[Built-in Mic Low Cut] or [MIC Low Cut]
Recording Audio
75
will appear on the
Advertisement
Table of Contents
