Additional Guidelines - REMEHA Quinta Ace 30 Installation And User Manual

Fig.9 Different pressure areas
Tab.14 Maximum length (L)
Diameter
(1)
Quinta Ace 30
Quinta Ace 45
Quinta Ace 55
Quinta Ace 65
Quinta Ace 90
Quinta Ace 115
(1) Retaining the maximum chimney length it is possible to use an extra 5 x 90º or 10 x 45º elbows.
7684359 - v.06 - 10012019
An 80/80 or 100/100 mm flue gas adapter (accessory) must be fitted for
this connection.
+ Combustion air supply and flue gas discharge are possible in different
pressure areas and semi-CLV systems, with the exception of the coastal
= L
area. The maximum permitted height difference between the combustion
air supply and the flue gas outlet is 36 m.
AD-0000030-02
80 mm
17 m
29 m
9 m
5 m
-
-
Tab.15
Diameter
45° bend
90° bend
Tab.16
Diameter
45° bend
90° bend
4.8.5
For installing the flue gas outlet and air supply materials, refer to the
instructions of the manufacturer of the relevant material. After
installation, check at least all flue gas outlet and air supply parts for
tightness.
Make sure that the flue gas outlet pipe towards the boiler has a sufficient
gradient (at least 50 mm per metre) and that there is a sufficient
Connection in different pressure areas (C
L Total length of the flue gas outlet and air supply duct
Connecting the flue gas outlet
Connecting the air supply
90 mm
29 m
40 m
17 m
10 m
-
-
Reduction table
Pipe reduction for each element used (parallel)
Pipe reduction for each element used (concentric)

Additional guidelines

Installation
Warning
If the flue gas outlet and air supply materials are not installed in
accordance with the instructions (e.g. not leak-proof, not correctly
bracketed), this can result in dangerous situations and/or physical
injury.
4 Before installation
)
53
100 mm 110 mm
40 m 40 m
(1)
40 m 40 m
(1) (1)
27 m 40 m
16 m 34 m
17 m 37 m
14 m 31 m
80 mm
1.2 m
4.0 m
80/125 mm
1.0 m
2.0 m
130 mm
40 m
(1)
40 m
(1)
40 m
(1)
40 m
(1)
40 m
(1)
40 m
(1)
100 mm
1.4 m
4.9 m
100/150 mm
1.0 m
2.0 m
19