Outline Of Operation Control By Microcomputer; Remote Controller (Model:rc-E4) - Mitsubishi Electric FDF71VNXVD Technical Manual

10. OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

(1) Remote controller (installed)
(a)

Remote controller (Model:RC-E4)

The figure below shows the remote controller with the cover opened. Note that all the items that may be displayed in the liquid
crystal display area are shown in the figure for the sake of explanation
Characters displayed with dots in the liquid crystal display area are abbreviated.
Ventilaion display
Displayed during ventilation operation
Centeal control display
Displayed when the air conditioning system is
controlled by centralized remote control.
Timer operation display
Displays the timer operation setting.
Temperature setting buttons
These buttons are used to set the
temperature of the room.
Timer button
This button is used to set
the timer mode.
Timer setting buttons
These buttons are used to set
the timer mode and the time.
GRILL button
This button has no function.
When this button is pressed,
(Invalid Operation)
is displayed, but it does not mean a failure.
Cover
AIR CON No. button
Display the indoor unit number connected to this
remote controller.
CHECK button
This button is used at servicing.
TEST button
This button is used during test operation.
The figure below shows the remote control with the cover opened.
＊ All displays are described in the liguid crystal display for explanation.
87
-
SET button
This button is used to fix the setting.
●
This button is used to set the silent mode.
●
RESET button
Press this button while making settings to go back to the
●
previous operation.
This button is also used to reset the "FILTER CLEANING" display.
●
(Press it after cleaning the air filter)
-
'11 • PAC-T-160
Weekly timer display
Displays the settings of the
weekly timer.
Operation setting display area
Displays setting temperature, airflow
volume, operation mode and oparation
message.
Operation/check indicator light
During oparation: Lit in green
In case of error: Flashing in red
Operation/stop button
This button is used to operate and stop
the air conditioning system.
Press the button once to operate the
system and press it once again to stop
the system.
MODE button
This button is used to change the
operation mode.
FAN SPEED button
This button is used to set the airflow
volume.
VENT button
This button is used to operate external
ventilator.
LOUVER button
This button is used to operate/stop the
swing louver.