Outline Of Operation Control By Microcomputer; Operation Control Function By Remote Controller; Unit Display Section - Mitsubishi Electric DXK09ZJ-S Technical Manual

Reference

9. OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

1 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

(1) Operation control function by remote controller

1. Operation control function by remote controller
Operation section
FAN SPEED button
Each time the button is pressed, the
display is switched over in turn.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
TEMPERATURE button
These buttons sets the indoor temperature.
(These buttons are used for setting the
current time and timer function as well.)
ON TIMER button
This button selects ON TIMER operation.
SLEEP button
This button selects SLEEP operation.
CLEAN switch
This switch changes the CLEAN mode.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.

Unit display section

Remote control signal receiver
Unit ON/OFF button
This button can be used for turning on/off the unit when remote
control is not available.
RUN (HOT KEEP) light (green)
Illuminates during operation.
Blinks when airflow stops due to the HOT
KEEP and CLEAN operation .
1.5 sec.
ON
HOT KEEP
OFF
0.5 sec.
3 sec.
ON
CLEAN operation
OFF
1 sec.
The above illustration shows all controls, but in practice
only the relevant parts are shown.

- -
OPERATION MODE select button
Each time the button pressed, the
display is switched over in turn.
ON/OFF (luminous) button
Press to start operation, press again to
stop.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down)
direction.
AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/right)
direction.
3D AUTO button
This button sets 3D AUTO operation.
OFF TIMER button
This button selects OFF TIMER operation
This switch is for resetting microcomputer
and setting time.
ALLERGEN CLEAR button
This button selects ALLERGEN CLEAR
operation.
3D AUTO light (green)
Illuminates during 3D AUTO operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
TIMER light (yellow)
Illuminates during TIMER operation.
'09•SRK-DB-087D
'11 • SRK-T-118
ACL switch