Folding Mechanism - Maxxus 7.3 Installation & Operating Manual

Folding mechanism

This treadmill is equipped with a folding mechanism.
To save space fold the treadmill deck up and down as follows:
Fold up the tread
Step 1:
Make sure that the slope of the treadmill is set to level „0", and is
turned off at the main switch.Remove the treadmill the mains plug
from the socket.
WARNING:
Never fold the running surface of the treadmill if the slope of the
treadmill is not set to level „0" or if the treadmill still turned on
Step 2:
To lift the tread, grasp it firmly with both hands at the back end of
the tread and then lift the tread upwards.
Always make sure that you have a secure standing position.
Step 3:
Push the tread upwards until the lock system clicks audibly.
Check that the locking system is engaged and the tread is secu-
red in its folded position by light shaking on the tread,
Fold down the tread
Step 1:
Lift the back end of the tread gently with both hands. Now press
the safety lever of the lock system down with your foot to release
the lever.
Pull the tread gently down.
Step 2:
The tread is fitted with a soft-fold system. This causes the tread
to automatically lower slowly until it stops when it has complete
contact with the ground. You should watch the tread until this is
finished and never leave it to fold down unattended.
WARNING:
Folding up or down of the tread should never be carried out by
children.
When folding down, always make sure that there are no objects,
pets or children under the tread
7
ENG