Installing The Water Pump - Yamaha VMX12 2001 Service Manual

WATER PUMP
4. Install:
• oil seal
• bearing 1
NOTE:
@
• Install the oil seal and bearing from the inside
of the water pump housing.
• Make sure the side of the bearing with the
number faces up.
• Gently tap the bearing into place until it is
flush with the water pump housing.
@
5. Install:
• impeller 1
• circlip 2
6. Install:
• key
• water pump driven gear
NOTE:
@
Align the slot a in the water pump driven gear
with the pin b.
@
7. Install:
• circlip 1

INSTALLING THE WATER PUMP

1. Install:
• water pump housing 1
WARNING
@
Always use a new gasket.
@
5 - 17
COOL
New
New