Yamaha VMX12 2001 Service Manual page 235

MIDDLE GEAR
Since the shims are only available in 0.10- or
0.15-mm increments, round off the hun-
dredths' digit.
Hundredth's digit
0, 1, 2
3, 4, 5, 6
7, 8, 9
In the example above, the calculated drive pin-
ion gear shim thickness is 0.54 mm. The chart
instructs you to round off to 0.55 mm. Thus,
0.15 mm and 0.4 mm should be used as indi-
cated in the following chart.
Drive pinion gear shim
Thickness (mm)
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
4 - 105
ENG
Rounded value
0
5
10
0.15 0.30 0.40 0.50