Disassembling The Clutch Release Cylinder - Yamaha VMX12 2001 Service Manual

HYDRAULIC CLUTCH
EAS00313
DISASSEMBLING THE CLUTCH RELEASE
CYLINDER
NOTE:
Before disassembling the clutch release cylin-
der, drain the clutch fluid from the entire clutch
system.
1. Remove:
• union bolt 1
• copper washers
• clutch hose 2
NOTE:
Put the end of the clutch hose into a container
and pump out the clutch fluid carefully.
2. Remove:
• oil seal
• clutch release cylinder piston
• spring
• clutch release cylinder piston seal
a. Blow compressed air into the joint opening
a to force out the piston from the clutch
release cylinder.
WARNING
@
• Cover the clutch release cylinder with a
rag. Be careful not to get injured when the
piston is expelled from the clutch release
cylinder.
• Never try to pry out the clutch release cyl-
inder piston.
@
b. Remove the clutch release cylinder piston
seal.
7 - 61
CHAS