VALVES AND VALVE SPRINGS
4. Remove:
NOTE:
@
Identify the position of each part very carefully
so that it can be reinstalled in its original place.
@
EAS00239
CHECKING THE VALVES AND VALVE
GUIDES
The following procedure applies to all of the
valves and valve guides.
1. Measure:
4 - 26
• spring retainer 1
• inner valve springs 2
• outer valve springs 3
• valve 4
• spring seat 5
• oil seal 6
• valve-stem-to-valve-guide clearance
Valve-stem-to-valve-guide clearance =
Valve guide inside diameter a –
Valve stem diameter b
Out of specification → Replace the valve
guide.
Valve-stem-to-valve-guide clear-
ance
Intake
0.010 ~ 0.037 mm
<Limit>: 0.08 mm
Exhaust
0.025 ~ 0.052 mm
<Limit>: 0.1 mm
ENG