Yamaha VMX12 2001 Service Manual page 19

Tool No.
Bearing retainer wrench
90890-04050
This tool is needed when removing or
installing the final drive shaft bearing.
Middle drive shaft nut wrench (55 mm)
90890-04054
This tool is needed when removing or
installing the middle drive shaft nut.
Middle drive gear holder
This tool is needed to remove and
YM-33222
install the middle drive pinion gear.
This tool is also used for the gear back-
lash adjustment.
Universal joint holder
90890-04062
This tool is needed when removing or
installing the driven pinion gear nut.
Middle gear backlash tool
90890-04080
This tool is needed for the gear back-
lash adjustment.
Clutch holding tool
90890-04086
This tool is needed to hold the clutch
when removing or installing the clutch
boss nut.
Damper spring compressor
90890-04090
This tool is needed when removing or
installing the damper spring.
Tappet adjusting tool
90890-04105
This tool is needed to rotate the cam-
shaft for access to the valve lifter and
valve pad.
Tool name/Function
1 - 8
SPECIAL TOOLS
GEN
INFO
Illustration