Table of Contents
Advertisement
WCS position encoding system
Mounting the Code Rail
Figure 7.14
Caution!
When mounting and using the tappet, make sure that the guide trolley is not subjected to any
forces.
There must be no rigid connection between the vehicle and the guide trolley.
Note!
Slide the guide trolley with the reader into the profile rail such that the electrical connector
points in the direction of the ascending position values.
7.2.6
Grounding the Aluminum Profile System
Connect the aluminum profile with the plant potential at low resistance at least every 30 m.
44
WCS2 guide trolley and tappet
ø 8 mm
Advertisement
Table of Contents
