Table of Contents
Advertisement
WCS position encoding system
Mounting the Code Rail
7
Mounting the Code Rail
With continuous position measurement for a route, you have to mount the code rail in one
piece. Depending on the usage conditions, there are various options for securing the code rail:
Mounting bracket
Aluminum profile rails
Installation position
The installation position of the code rail is arbitrary. When mounting the code rail, make sure
that all mounting brackets or rail holders of the profile system are at one level. The area on
which the mounting bracket or rail holders are mounted must be level.
Note!
The following examples show the installation positions with mounting brackets. The installation
positions are equally valid for mounting with the aluminum profile system.
Figure 7.1
24
Horizontal installation
Advertisement
Table of Contents
