Safety; Symbols Relevant To Safety; General Safety Instructions - Pepperl+Fuchs WCS Series Manual

Position encoding system
Hide thumbs Also See for WCS Series:
Table of Contents

Advertisement

WCS position encoding system

Safety

3
Safety
3.1

Symbols relevant to safety

Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt devices and any connected facilities or systems, or result in
their complete failure.
3.2

General safety instructions

Responsibility for planning, assembly, commissioning, operation, maintenance, and
dismounting lies with the system operator.
Installation and commissioning of all devices must be performed by a trained professional only.
User modification and or repair are dangerous and will void the warranty and exclude the
manufacturer from any liability. If serious faults occur, stop using the device. Secure the device
against inadvertent operation. In the event of repairs, return the device to your local
Pepperl+Fuchs representative or sales office.
Note!
Disposal
Electronic waste is hazardous waste. When disposing of the equipment, observe the current
statutory requirements in the respective country of use, as well as local regulations.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wcs2-pl2Wcs3b-pl2Wcs2Wcs3Wcs3bWcs2b

Table of Contents