WCS position encoding system
Mounting the Code Rail
Figure 7.3
Figure 7.4
7.1
Mounting the Code Rail with Mounting Brackets
The bracket system is an easy way to mount laminate or stainless steel code rails. It consists of
brackets for routing the code rail in straight sections, as well as brackets for routing the code rail
on curves and circular paths. The brackets are made from galvanized sheet steel and are
supplied pre-assembled. The mounting brackets for installation of the WCS code rail can be
delivered in three different versions:
Without fastening screws
With fastening screws
With fastening screws for mounting in C profile rails
26
Installation on a wall
Installation on a ceiling