WCS position encoding system
Mounting the Code Rail
Figure 7.20
3. Snap the profile rail into the rail holder by pressing lightly.
7.3.2
Adapter Plates for Profile Rails
Adapter plates are required for connecting aluminum profile rails. The WCS3-MC1 connector
consists of a 170 mm long extruded aluminum profile and two self-tapping screws.
Designation
WCS3-MC1
Assembling the Adapter Plate
1. Slide the adapter plate into the bottom grooves of the two profile rails that you want to con-
nect. The end of the connector that has the holes should be pushed in first.
Aligning the rail holders (example for WCS3-MH2)
Part number
Function/use
184074
Adapter plate for
aluminum profile rails
Material/mounting
Aluminum/steel self-
tapping screws M3 x 4.5
mm
49