Table of Contents
Advertisement
Assembly, Connection and Putting into Operation
5.1.1 Assembly on a gas meter
Mount the EK280 on a gas meter using a mounting bracket
(see Appendix) as well as the corresponding cylinder screws
and square nuts.
8
7
Fig. 6
5.1.2 Assembly on a pipeline
Mount the EK280 to a pipeline using an A2 universal
bracket with a pipe clamp (see Appendix) as well as
corresponding cylinder screws.
5
4. The device should be mounted on the pipeline in such a way that it is in
a fixed position and cannot fall down.
1
4
6
5
2
3
1
Fig. 7
1. Using two M5 x 10 mm (Fig. 6: 4 )
cylinder screws, attach the
mounting bracket (Fig. 6: 6 ) to the
EK280 (Fig. 6: 1 ).
2. Tighten the cylinder screws so that
the bracket is sitting in a fixed
position.
3. Attach the mounting bracket using
two square nuts M5 (Fig. 6: 7 ) and
two M5 x 10 mm (Fig. 6: 5 )
cylinder screws at the back of the
meter head (Fig. 6: 8 ).
4. Tighten the cylinder screws so that
the device is in a fixed position and
cannot fall down.
1. Using two M5 x 10 mm (Fig. 7:
i1i) cylinder screws, insert the
A2 universal bracket in the
boreholes provided (Fig. 7: i3 )
on the EK280 (Fig. 7: i2 ).
2. Tighten the cylinder screws so
that the bracket is sitting in a
4
fixed position.
3. The A2 universal bracket (Fig. 7:
i3 ) and the device (Fig. 7: i2 )
should be fastened to the
pipeline (Fig. 7: i5 ) using the
pipe clamp (Fig. 7: i4 )
35
Advertisement
Table of Contents
