Table of Contents
Advertisement
60
5.3.2.3
Sensors
Examples of how to seal the connected temperature and
pressure sensors are presented in chapters 0 and 5.2.4.
5.3.3 Closing the housing
CAUTION!
Material damage may arise through improper closing of
the device!
Improper closing of the device may lead to material damage
as a result of cable connections being squashed.
Therefore:
–
–
Assembly, Connection and Putting into Operation
Please ensure that the cable ducts are positioned
correctly when closing the device.
To close, slightly raise the lid on its hinges.
1
Instromet
Fig. 22
1. Close the housing using the
four screws provided ( 1 ).
2. Close the unused cable
glands using the sealing
plugs provided within the
scope of supply.
Advertisement
Table of Contents
