Intended Use - Honeywell EK280 Operating Instructions Manual

Safety
2.2

Intended use

This device is solely designed and constructed for the intended use
described below.
The volume conversion device EK280 is used to convert the gas volume
read from a gas pipe under measurement conditions, into base
conditions, as well as to allocate the measured quantities to tariffs.
Furthermore, the device can also be used to measure, record and
monitor additional variables depending on the configuration set by the
user.
Intended use also refers to compliance with all of the information contained
in this manual. Any use beyond the intended use and/or other types of use,
shall be considered as misuse and can result in dangerous situations. The
manufacturer shall not be held liable for any claims for damages resulting
from misuse of this device.
WARNING!
Danger resulting from misuse.
Misuse of the device may lead to dangerous situations.
Therefore:
– Only use the device according to its intended use.
– Do not use the device to regulate the gas flow or other
variables affecting the gas volume in the entire system.
15