Operation
6.3.2 Button functions
The pressure and arrow buttons have the following functions:
Button
Function
Jump right to another data list.
Jump to the second part of a two-part value.
Jump down through a data list.
Jump left to another data list.
Jump up through a data list.
ENTER
Depending on the respective data class, you can:
–
–
–
ESC
Depending on the respective data class, you can:
–
–
+
By pressing both of the buttons at the same time:
–
–
+
–
By pressing the function key, you can:
–
–
–
Activate the input mode.
Open the respective sub-menu.
Update the corresponding measurement.
Leave a sub-menu and jump to its entry value (one
menu level up).
Delete an input (input mode).
You can display the "Main" register.
You can set a value in input mode (reset to start
value)
Address display of the current value.
Display the "Main" register.
Freeze the current display.
Delete the status register.
65