Cust." Register (Customer) - Honeywell EK280 Operating Instructions Manual

74

6.4.3 "Cust." register (Customer)

This register is used to display and check special device settings and
conditions. This application is provided for gas customers.
This register can be freely programmed by the user via the enSuite
configuration software.
The following parameters are programmed in-house:
Display Meaning
Time Date and time
Vb Volume at base conditions
Vm Volume at measurement
conditions
p Pressure
T Temperature
K Compressibility ratio factor
C Conversion factor
SReg Status register (total)
Maximum measurement period
VbMP
counter Vb in the current month
Maximum daily counter Vb in
VbDy
the current month
Qb Flow at base conditions
Qm Actual flow rate
6.4.3.1 Time - Date and time
The displayed time is updated every 30 seconds in battery mode and every
2 seconds in power supply operation.
6.4.3.2 Values from the "Main" register
Vb –
Volume at base conditions, see chapter 6.4.2.1
Vm –
Volume at measurement conditions, see chapter 6.4.2.2
–
p Gas pressure, see chapter 6.4.2.3
–
T Gas temperature, see chapter 6.4.2.4
–
K Compressibility ratio factor, see chapter 6.4.2.5
–
C Conversion factor, see chapter 6.4.2.6
SReg – Status register (total)
6.4.3.3
Unit Access Address
- -
3
m C
3
m C
bar -
°C -
- -
- -
- -
- -
- -
3
m /h -
3
m /h -
Operation
1:400
2:300
4:300
7:310_1
6:310_1
8:310
5:310
1:101
3:161
4:161
2:310
4:310